Creates the specified Line if it doesn't exist, and sets the specified properties of it.
| Overload Name | Description |
|---|---|
| BringForward | Bring a line forward. |
| BringToFront | Bring a line to front. |
| FlipHorizontal | Flip a line horizontally. |
| FlipVertical | Flip a line vertically. |
| General | Add or modify a line. |
| IncrementLeft | Increment the left position of a line. |
| IncrementTop | Increment the top position of a line. |
| Remove | Remove a line. |
| ScaleHeight | Scales a line per the specified factor. |
| ScaleWidth | Scales a line per the specified factor. |
| Select | Select a line. |
| SendBackward | Send a line backwards. |
| SendToBack | Send a line to the back. |
Bring a line forward.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
Bring a line to front.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
Flip a line horizontally.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
Flip a line vertically.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
Add or modify a line.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
| OnClickProcedure | The name of the procedure to execute when the line is clicked. |
| OnDoubleClickProcedure | The name of the procedure to execute when the line is double-clicked. |
| Placement |
The placement behavior of the chart. FreeFloating: Do not move with cells. Move: Do not move with cells. MoveAndSize: Move and size with cells.
Specify one of the following values or an arbitrary value:
<blank>FreeFloatingMoveMoveAndSize
|
| StartHorizontalColumn | The horizontal starting point of the line specified as a column number. 0.0 is the left edge of the first column. 0.5 is the middle of the first column, etc. If used with the StartHorizontalPoints argument then the two are added together to determine the line's starting point. |
| StartHorizontalPoints | The horizontal starting point of the line specified in points. If used with the StartHorizontalColumn argument then the two are added together to determine the line's starting point. |
| StartVerticalRow | The vertical starting point of the line specified as a row number. 0.0 is the top edge of the first row. 0.5 is the middle of the first row, etc. If used with the StartVerticalPoints argument then the two are added together to determine the line's starting point. |
| StartVerticalPoints | The vertical starting point of the line specified in points. If used with the StartVerticalRow argument then the two are added together to determine the line's starting point. |
| EndHorizontalColumn | The horizontal ending point of the line specified as a column number. 0.0 is the left edge of the first column. 0.5 is the middle of the first column, etc. If used with the EndHorizontalPoints argument then the two are added together to determine the line's ending point. |
| EndHorizontalPoints | The horizontal ending point of the line specified in points. If used with the EndHorizontalColumn argument then the two are added together to determine the line's ending point. |
| EndVerticalRow | The vertical ending point of the line specified as a row number. 0.0 is the top edge of the first row. 0.5 is the middle of the first row, etc. If used with the EndVerticalPoints argument then the two are added together to determine the line's ending point. |
| EndVerticalPoints | The vertical ending point of the line specified in points. If used with the EndVerticalRow argument then the two are added together to determine the line's ending point. |
| LockAspectRatio |
Whether the text box's aspect ratio is locked.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Locked |
Whether the text box is locked.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Visible |
Whether the text box is visible.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| PrintLine |
Whether to print the text box.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Color | Select the color for the line. |
| ColorIndex |
Excel color palette index to use for the line. The value is zero-based from 0 to 55.
Specify one of the following values or an arbitrary value:
<blank>012345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455
|
| Transparency | From 0.0 to 1.0 (opaque to transparent). |
| Weight | The weight of the line, in points. |
Increment the left position of a line.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
| Increment | Specifies the increment in points. |
Increment the top position of a line.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
| Increment | Specifies the increment in points. |
Remove a line.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
Scales a line per the specified factor.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
| Factor | Specifies the factor by which to scale the original or current size. |
| UseOriginalSize |
Whether the original or current as the starting size.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| ScaleFromPosition |
Whether the size should be scaled from the top-left, middle or bottom-right of the shape.
Specify one of the following values or an arbitrary value:
<blank>TopLeftMiddleBottomRight
|
Scales a line per the specified factor.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
| Factor | Specifies the factor by which to scale the original or current size. |
| UseOriginalSize |
Whether the original or current as the starting size.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| ScaleFromPosition |
Whether the size should be scaled from the top-left, middle or bottom-right of the shape.
Specify one of the following values or an arbitrary value:
<blank>TopLeftMiddleBottomRight
|
Select a line.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
| Replace |
Whether to replace the current selection of shapes, or add this shape to the selections.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
Send a line backwards.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |
Send a line to the back.
| Argument | Description |
|---|---|
| SpecifySheetBy |
Select how to specify which worksheet to select while the method is being executed.
Specify one of the following values or an arbitrary value:
<blank>SheetNameSheetNumberAllSheets
|
| SheetSpec | Specify the sheet-name or sheet-number, depending on SpecifySheetBy. If SpecifySheetBy is AllSheets then SheetSpec can be left empty. |
| Address | The address of a range to select for the execution of the method. |
| CellByCell | Whether to execute the method on a cell-by-cell basis, or on the range specified by the address. |
| ReverseOrder | Whether to loop through the rows and columns from highest to lowest. Only applies when CellByCell is true. |
| MethodCondition |
If the result of method-condition expression resolves to FALSE, then the method is not executed.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| CellCondition |
If the result of the condition expression resolves to FALSE, then the current cell is skipped.
Specify one of the following values or an arbitrary value:
<blank>FALSETRUE
|
| Name | The name of the Line. |